Kytun AluVerge Slate Dry Verge Trim (T1)

The Kytun AluVerge Slate Dry Verge Trim (T1) can be used with both interlocking slates and double lap natural or fibre cement slates. This system permanently secures slate applications on gable ends whilst protecting the verge from wind uplift and rain. Manufactured using high grade pre-primed polyester coated aluminium.

Our Kytun AluVerge Slate Dry Verge Trim helps to create a seamless and clean dry verge detail and an aesthetically pleasing finish to the gable ends on your next roofing project. This weathertight system ensures water cannot penetrate, providing an enhanced level of protection for all your roofs. The unique design replaces one of the 2 mechanical fixings of the slates along the verge by securing them in place in accordance with BS5534. As well as being weatherproof, strong and durable, the dry verge is also maintenance-free.

Our Kytun AluVerge Slate Dry Verge Trims are suitable for most man-made fibre cement & natural slates on the market.
  • 18mm Version: Suitable for a maximum individual Slate thickness of 4-5mm
  • 25mm Version: Suitable for a maximum individual Slate thickness of 6-8mm
  • Provides full wind uplift and rain protection demonstrated by independent BRE testing
  • Patented Drip System which allows for self-drainage of rain water into the eaves gutter
  • Extremely easy and quick to install
  • Meets BS 5534 & BS8612 requirements & NHBC guidelines
  • Requires no maintenance once installed
  • Huge labour-saving costs
  • Compatible with most man-made fibre cement & natural slates on the market
  • Creates continuous clean verge appearance
  • 30 years ALU Range and 20 years colour Warranty

For the Home Owner

  • Maintenance free, does not require repairing over time
  • Does not have to worry about mortar cracking & falling out over time
  • Verge edge slates are more securely installed
  • Verges are properly covered, will stop rain water penetrating the roof space and high winds blowing off Slates from the roof

For the Roofer

  • Can be installed in all-weather types, including rain, something which can't be done when using mortar
  • Dramatically speeds up the installation time, approximately 50% quicker than using mortar
  • When installing our Kytun AluVerge Slate Dry Verge Trim, the verge trim gives the roofer a fixed guide to work to which saves time.

For the Architect / Professional

  • System is guaranteed for both colour and material
  • Made from high grade PPC Aluminium
  • Low carbon footprint in transit due to its low weight
  • 100% Fully Recyclable with 90% of all Aluminium recycled.
  • Highest quality rapid dry fix system available
  • Complies with BS 5534, BS8612 requirements and NHBC guidelines
  • Clean aesthetic lines for sharp finish
Product Code Dimensions Material Colour
C01 18mm x 3m Aluminium
C01N 25mm x 3m Aluminium
CO1G 18mm x 3m Steel
CO1NG 25mm x 3m Steel
CO1GT 18mm x 3m Steel
CO1NGT 25mm x 3m Steel

Discuss your project needs with us today

We are on hand to assist you with any queries you may have on the best options for your project. Alternatively, if you know what you are looking for from our range and need to locate you nearest supplier, use our stockist finder feature below.

Find A Stockist