Frequently Asked Questions

We’ve put together some commonly asked questions on our product range.
If you can’t find the answer to your question please contact us

8.30am – 5.30pm

For standard products we can deliver from 24 to 48 hours if required.
Bespoke products can take from 10-15 working days

Yes we can offer up to 28 different stock colour but also we can source any RAL colour if required.

Ireland & the UK

The Kyun Roofing accessory range can be purchased in any good builders or roofing merchant in Ireland while in the UK the products are available in all major Roofing Merchants.

The T1 Aluminium dry Verge system can be joined by overlapping the profile.

The main difference between the T1 and T2 system is the presence of a down leg on the T2 system. This down leg provides protection to the end of battens increasing your roofs life. With the T1 system a fascia must provide this function with a run of mastic sealant between the fascia and the underside of our trim.

All our products are designed to be an over batten fix.

We recommend the use of a 40mm long galvanised or stainless-steel Clout nail on every batten.

The system is available in our standard Slate Grey (very close to RAL 7024) and Jet Black (RAL 9005). Special colour requests can be accommodated on occasion. Please contact the office for more details.

There are no end caps available. The system is designed to run rainwater into the gutter.

The product can be simply mitre cut and butted together at the apex.
Alternatively, an apex piece made to suit your apex angle is available.
These fit over the dry verge and give a sharp, neat appearance.

We can but we will require some information from you or your architect. Just contact and we will get in touch.

The colour options available depend on the vent selected. Please contact our technical team for information.

In the vast majority of cases Kytun are capable of providing a matched tile. We will need you to provide the name and manufacturer of the tile.

Speak with your architect they normally have plans available in a pdf format.

The guttering range comes in modern & traditional styles available in Ogee & Traditional cast effect.

Once we review your project we can determine the downpipe required but the standard is 76mm downpipes while for commercial projects 100mm is more popular.

We have over 28 various standard colours but we can source any colour required.

In building and construction each colour has a specific RAL as an industry standard which is the standard terminology.

Yes we have a dedicated site support team that can take help prepare a quotation from your site plan.

Yes were possible but before manufacturing starts the client is required to sign off on all products from the onsite measurement.

Yes we can manufacture all the various products in the range but please take into consideration lengths and widths required.

The Secret Fix (Clip it) system provides a fully waterproof system which utilises an 8mm Aluminium Jointer and stainless steel clip with rubber seals integral to the design.

As most bespoke products follow similar installation guidelines there is no actual fitting instructions just the standard install guide

The maximum lengths are standard 4 meter’s.

Copings can be made to order to fit exact wall width.

Our standard thickness are 1m, 2m, 3m.

Yes we can source various different RAL colours.

Aluminium, Plastisol & Steel

Discuss your project needs with us today

We are on hand to assist you with any queries you may have on the best options for your project. Alternatively, if you know what you are looking for from our range and need to locate you nearest supplier, use our stockist finder feature below.

Contact Us Find A Stockist