Kytun Cavity Tray Apex - Brickwork

The Apex Tray is the last tray to be fitted and goes at the top of the abutment.

This tray ensures the apex of the abutment roof is not vulnerable to water ingress.

Add to quote
Cavity Tray Apex - Brickwork
  • An apex tray is used to catch any water in the cavity adjacent to the roof abutment at the apex.
  • The apex tray can expel this water onto the ridge or it can allow the water to cascade onto the adjacent intermediate tray.
  • Brickwork apex cavity tray range with integral lead flashings are available in 5 degree increments from 25- 50 degrees.
  • Specials available on request.
  • Suitable for 75mm course height masonry.

For the Home Owner

  • Proven system to ensure no water penetration at abutments.
  • Factory produced product.

For the Roofer

  • Standard product installation.
  • Full technical support available.
  • Installation guide available.
  • Pitch dedicated, integral lead flashings reduce waste and save time during installation.

For the Architect / Professional

  • Full technical service available.
  • Take off service available.
  • Proven, quality system.
 

Datasheets

Discuss your project needs with us today

We are on hand to assist you with any queries you may have on the best options for your project. Alternatively, if you know what you are looking for from our range and need to locate you nearest supplier, use our stockist finder feature below.

Find A Stockist

You may also be interested in