Kytun Horizontal Cavity Trays

Our Horizontal Trays are designed to prevent water penetration into the building in areas where a lean-to or flat roof meets an external wall.

The Horizontal tray is suitable for use with 100mm thick external wall construction with a minimum 50mm clear or partially filled cavity. Also suitable for use in full filled and pumped cavity applications.

Available with or without integral lead flashings.

  • Horizontal trays are used where a lean-to pitched or flat roof  abuts an external wall.
  • Suitable for use with 50mm cavity void and 100mm outer skin construction.
  • Trays available with or without factory fitted lead flashings.
  • Range of corners, stopends and weepholes also available.
  • Trays with integral lead flashings feature a continuous butyl strip between the lead and the tray to prevent driving rain ingress, all flashings are mechanically fixed to the tray with stainless steel staples.

For the Home Owner

  • Proven system to ensure no water penetration at abutments.
  • Factory produced product.

For the Roofer

  • Standard product installation.
  • Full technical back up available.
  • Installation guide available.

For the Architect / Professional

  • Full technical back up available.
  • Take off service available.
  • Proven, quality system.

Discuss your project needs with us today

We are on hand to assist you with any queries you may have on the best options for your project. Alternatively, if you know what you are looking for from our range and need to locate you nearest supplier, use our stockist finder feature below.

Find A Stockist

You may also be interested in