Kytun Intermediate Cavity Tray - Blockwork

The Intermediate Tray has an upstand at one end only. This is so that the water can run out of the tray down the cavity tray system.

The upstand on the tray prevents driving rain penetrating the outer wall and tracking across the masonry.

An AT100 (available separately) is required with each blockwork intermediate cavity tray.

  • An intermediate tray is used to collect any water within the cavity or cascade the water to the catchment tray.
  • Intermediate trays are available left and right handed for pitches from 25 degrees to 50 degrees in 5 degree increments.
  • Stepped tray for pitched abutments
  • Preformed tray holds itself rigid within the wall cavity
  • Built in stop end ensures correct water run off direction
  • Angled ribs trap falling mortar ensuring clean drainage

For the Home Owner

  • Proven system to ensure no water penetration at abutments.
  • Factory produced product.

For the Roofer

  • Standard product installation.
  • Full technical support available.
  • Installation guide available.
  • Pitch dedicated, integral lead flashings reduce waste and save time during installation.

For the Architect / Professional

  • Full technical back up available.
  • Take off service available.
  • Proven, quality system.

Discuss your project needs with us today

We are on hand to assist you with any queries you may have on the best options for your project. Alternatively, if you know what you are looking for from our range and need to locate you nearest supplier, use our stockist finder feature below.

Find A Stockist

You may also be interested in