Kytun Performance Plus Slate Dry Verge Trim (T1)

Kytun Performance Plus Aluminium Slate Dry Verge Trim (T1) can be used with natural or fibre cement double lap slates. This system permanently secures full & half-width slates along the verge edge whilst protecting from wind uplift and driving rain ingress in accordance with BS5534:2014+A2:2018. Manufactured using high grade pre-primed polyester coated aluminium.

Alternative to the “slate-and-a-half”.

Kytun Performance Plus Aluminium Slate Dry Verge Trim offers a perfect alternative to the “slate-and-a-half” needed at the verge edge. BRE tested to prove suitability regarding wind uplift performance throughout the UK and Ireland, even with verge edge half-width slates as narrow as 125mm.

The verge profile helps to create a seamless and clean dry verge detail, providing an aesthetically pleasing finish to the gable ends on your next roofing project. As well as being weatherproof, strong and durable, the dry verge is also maintenance-free.

Kytun Performance Plus is suitable for use alongside most man-made fibre cement & natural slates on the market.
  • 18mm Version: Suitable for a maximum individual Slate thickness of 4-5mm
  • 25mm Version: Suitable for a maximum individual Slate thickness of 6-8mm
Kytun Performance Plus
  • Permanently secures half width slates as narrow as 125mm at the verge edge
  • BRE tested and proven to resist at least 13x any anticipated wind load force anywhere in the UK or Ireland.
  • Provides full driving rain protection as demonstrated by independent BRE testing
  • Patented Drip System which allows for self-drainage of rain water into the eaves gutter
  • Extremely easy and quick to install
  • Meets BS 5534 & BS8612 requirements & NHBC guidelines
  • Requires no maintenance once installed
  • Huge labour-saving costs
  • Compatible with most man-made fibre cement & natural slates on the market
  • Creates continuous clean verge appearance
  • 30 years ALU Range and 20 years colour Warranty

For the Home Owner

  • Maintenance free, does not require repairing over time
  • Does not have to worry about mortar cracking & falling out over time
  • Verge edge slates / half slates are permanently and securely installed
  • Verges are properly covered, will stop rain water penetrating the roof space and high winds blowing off Slates from the roof

For the Roofer

  • Can be used with half width slates as narrow as 125mm wide without risk of cracking, no need for “slate-and-a-half
  • Can be installed in all-weather types, including rain, something which can't be done when using mortar
  • Dramatically speeds up the installation time, approximately 50% quicker than using mortar
  • When installing our Kytun AluVerge Slate Dry Verge Trim, the verge trim gives the roofer a fixed guide to work to which saves time

For the Architect / Professional

  • Can be used anywhere, even in exposed coastal regions throughout the UK & Ireland
  • System is guaranteed for both colour and material
  • Made from high grade PPC Aluminium
  • Low carbon footprint in transit due to its low weight
  • 100% Fully Recyclable with 90% of all Aluminium recycled
  • Highest quality rapid dry fix system available
  • Complies with BS 5534, BS8612 requirements and NHBC guidelines
  • Clean aesthetic lines for sharp finish
Product Code Dimensions Material Colour
C01 18mm x 3m Aluminium
C01N 25mm x 3m Aluminium
CO1G 18mm x 3m Steel
CO1NG 25mm x 3m Steel
CO1GT 18mm x 3m Steel
CO1NGT 25mm x 3m Steel

Discuss your project needs with us today

We are on hand to assist you with any queries you may have on the best options for your project. Alternatively, if you know what you are looking for from our range and need to locate you nearest supplier, use our stockist finder feature below.

Find A Stockist