Kytun AluVerge Tile Dry Verge System (T1) - Batten Protector

The Kytun AluVerge Tile Dry Verge Batten Protector C09F allows roofers to use our C09 trim whilst also ensuring full end batten protection.

The batten protector can be installed with 40mm covering the batten or 60mm. This is at the discretion of the roofer.

The Kytun C09F Batten Protector is ideal for use with both the Performance Plus Slate Dry Verge (T1) and the Performance Plus Tile Dry Verge (T1). The angle piece can be installed to provide either 40mm or 60mm vertical cover over the ends of the battens or battens & counterbattens where required.
  • Provides full wind driven rain protection to the batten ends
  • Over batten fix is extremely easy and quick to install
  • Requires no maintenance once installed
  • Huge labour-saving costs
  • Can be used with roof battens or roof batten & counterbattens
  • Creates continuous clean verge appearance
  • 30 years ALU Range and 20 years colour Warranty

For the Home Owner

  • Maintenance-free does not require repairing over time
  • Verge batten ends are properly covered, will prevent rainwater penetrating the roof.

For the Roofer

  • Can be installed in all-weather types, including rain, something which can’t be done when using mortar
  • Over batten fix method dramatically speeds up the installation time.

For the Architect / Professional

  • The system is guaranteed for both colour and material
  • Made from high-grade PPC Aluminium
  • Low carbon footprint in transit due to its low weight
  • 100% Fully Recyclable with 90% of all Aluminium recycled.
  • Clean aesthetic lines for a sharp finish

Discuss your project needs with us today

We are on hand to assist you with any queries you may have on the best options for your project. Alternatively, if you know what you are looking for from our range and need to locate you nearest supplier, use our stockist finder feature below.

Find A Stockist