Kytun AluVerge Retro-Fit Slate Dry Verge Trim

The Kytun AluVerge Retro-Fit Aluminium Slate Dry Verge Trim is ideal for roofs to which slates have already been fixed, to protect slates from wind uplift and rain penetration.

The design helps protect the edge of the roof from the elements and eliminates the possibility of lifting and damage to the roof underlay. No mortar or timber guides are required. It can be bespoke manufactured to virtually any profile to suit individual requirements.

All our bespoke dry verge is manufactured from 0.7mm  high grade aluminium.

It is installed by placing the trim over the edge of the slates and face fixing into the barge boards.

The components are manufactured from high grade pre-primed polyester coated aluminium.

Suitable for most man-made fibre cement slates and natural slates on the market.
  • 18mm Version: Suitable for a maximum individual slate thickness of 4-5mm
  • 25mm Version: Suitable for a maximum individual slate thickness of 6-8mm
  • Provides full wind uplift and rain protection demonstrated by independent BRE testing
  • Patented Drip System which allows for self drainage of rainwater into the eaves gutter
  • Extremely easy and quick to install
  • Meets BS 5534 & BS8612 requirements & NHBC guidelines
  • Requires no maintenance once installed
  • Huge labour-saving costs
  • Compatible with most man-made fibre cement & natural slates on the market
  • Creates continuous clean verge appearance
  • 30 years ALU Range and 20 years colour Warranty

For the Home Owner

  • Maintenance-free does not require repairing over time
  • Does not have to worry about mortar cracking & falling out over time
  • Verge edge slates are more securely installed
  • Verges are properly covered, will stop rainwater penetrating the roof space and high winds blowing off slates from the roof

For the Roofer

  • Can be installed in all-weather types, including rain, something which can't be done when using mortar
  • Dramatically speeds up the installation time, approximately 50% quicker than using mortar
  • When installing our Kytun AluVerge Slate Dry Verge Trim, the verge trim gives the roofer a fixed guide to work to which saves time.

For the Architect / Professional

  • The system is guaranteed for both colour and material
  • Made from high-grade PPC Aluminium
  • Low carbon footprint in transit due to its low weight
  • 100% Fully Recyclable with 90% of all Aluminium recycled
  • Highest quality rapid dry fix system available
  • Complies with BS 5534, BS8612 requirements and NHBC guidelines
  • Clean aesthetic lines for a sharp finish

Discuss your project needs with us today

We are on hand to assist you with any queries you may have on the best options for your project. Alternatively, if you know what you are looking for from our range and need to locate you nearest supplier, use our stockist finder feature below.

Find A Stockist