Products

Learn more

Kytun Slate Dry Valley Trim

The Kytun Slate Dry Valley Trim is specifically for use in conjunction with our Kytun Aluminium Dry Valley Trough. Due to the high volume of water travelling down to the…

Learn more

Bird Eaves Comb

Bird comb is a simple to install solution to protect against the entry of birds, vermin & debris through gaps left by profiled tiles at the eaves. The Kytun Bird…

Learn more

Kytun Tile Dry Valley Trim

The Kytun Tile Dry Valley Trim is specifically for use with flat tiles in conjunction with our Kytun Tile Dry Valley Trough. Due to the high volume of water travelling…

Learn more

Kytun Catchment Cavity Tray – Blockwork

The purpose of a cavity tray is to prevent water ingress into a building at an abutment where blockwork rises above the roof slope or flat roof area. A catchment…

Learn more

Kytun Cavity Tray Apex – Blockwork

The Apex Tray is the last tray to be fitted and goes at the top of the abutment. It has upstands at either end and allows the water to be…

Learn more

Kytun Intermediate Cavity Tray – Blockwork

The Intermediate Trays have a stop-end at one end of the tray making them either left or right-handed. Any water in the cavity tray is cascaded out at the open…

Learn more

Kytun Catchment Cavity Tray – Brickwork

The purpose of stepped cavity trays is to stop water ingress into a building at an abutment where brickwork rises above the adjacent pitched roof abutment. A Catchment Tray is…

Learn more

Kytun Cavity Tray Apex – Brickwork

The Apex Tray is the last tray to be fitted and goes at the top of the abutment. This tray ensures the apex of the abutment roof is not vulnerable…

Learn more

Kytun Intermediate Cavity Tray – Brickwork

The Intermediate Tray has an up stand at one end only. This is so that the water can run out of the tray down the cavity tray system. The up…

Learn more

Continuous Rafter Tray 6m

Continuous Rafter Trays are a simple but effective way of preventing loft insulation from being pushed up to the underside of the roofing underlay and will maintain a clear ventilation…

Learn more

Kytun Performance Plus Tile Dry Verge System (T1)

The Kytun Performance Plus Tile Dry Verge System (T1) has been independently tested by BRE to BS8612 and complies with both BS5534 and NHBC technical requirements. The Tile Dry Verge…

Learn more

Kytun Performance Plus Dry Verge – Batten End Protector

The Kytun Performance Plus Dry Verge Batten End Protector C09F has been independently tested by BRE to BS8612 and complies with both BS5534 and NHBC technical requirements. The Batten End…

Learn more

Kytun Performance Plus Tile Dry Verge System (T1) – Bell Cast

The Kytun AluVerge Tile Dry Verge System C09C Bell Cast has been independently tested by BRE to BS8612 and complies with both BS5534 and NHBC technical requirements. This piece provides…

Learn more

Kytun Performance Plus Tile Dry Verge System (T2)

The Kytun Performance Plus Tile Dry Verge System (T2) permanently secures tiles on the gable ends and gives an attractive maintenance-free finish to the roofline. This product has been independently…

Learn more

Kytun Performance Plus Tile Dry Verge System – Standard

The Kytun Performance Plus Tile Dry Verge System - Standard has been independently tested by BRE to BS8612 and complies with both BS5534 and NHBC technical requirements. The Standard Tile…

Learn more

Kytun AluVerge Tile Dry Verge System – Retro-Fit

The Kytun AluVerge Tile Dry Verge System - Retro-Fit has been independently tested by BRE to BS8612 and complies with both BS5534 and NHBC technical requirements. The Retro-Fit system permanently…